Design and installation of solar
power plants in Kyiv, Kharkov, Dnipro, Odessa, Nikolaev, Lvov, Zaporozhye and other cities of Ukraine.
Pillar designs, manufactures and installs metal racks for industrial solar stations and additional facilities.
We can provide you with typical solutions for tables for solar panels. These tables are designed specifically for the climatic conditions of Ukraine and provide optimal energy generation. We can also design and produce tables for your individual tasks. We select the best option for the foundation, depending on the conditions on the site, so it can be: a screw foundation on ground-screws, racks for concreting and driven piles.
We can put on the construction site and install additional structures to ensure the safety and ease of operation of the solar station: fences for your solar station, foundations for residential complexes, guard houses and transformer substations. As well as lighting poles and flagpoles.
One ground screw is installed in up to 15 minutes. You can start the construction of the building immediately after finishing with ground screws. Foundation of the house on the ground screws does not require shrinkage, because after screwing up the soil is compacted and as a result the soil is capable of supporting the weight of the house.
The possibility of mounting on sites with a complex landscape or on a slope, where the concrete foundation requires enormous labor and financial costs.
It is possible to install the foundation within several days. Involvement of complex construction equipment and excavation as concrete works are not required.
Galvanized piles are practically not corroded, which allows its use in water-saturated soils and even in reservoirs.
Installation of the ground screw foundation is carried out using a mode, in which there remains a minimum of construction waste at the end of the work.
Compared to strip foundations, the pouring of it in winter time requires additional costs bound on thermal insulation of concrete. The installation of ground screws can be done in the normal operating mode.
In order to get optimal solution for the construction of the foundation the customer must provide a geological survey of the site and provide a construction project. Considering these data experts make conclusions about the properties of the soil and the loads of the future construction.
Based on the data obtained our engineers prepare a calculation of the required number of screws and the distance between them, as well as the depth of it’s immersion. Depending on the collected loads for the foundation of the house, the optimal diameter and required length for ground screws are selected.
Screw foundations for low-rise buildings are installed in a short time. Depending on the complexity of the object, there are three options for screwing in: manual, electromechanical and hydraulic. After the ground screws have been installed at the required in design depth, the headstrap is strapped.
We can provide you with metal structures for industrial solar power plants, both terrestrial and roof types.
We have standard solutions designed specifically for the optimal generation of solar energy in the climatic conditions of Ukraine. We can also develop and produce metal structures for your individual tasks.
We select the best foundation for the conditions on the construction site, so it can be: a screw foundation on ground screus, concrete stands and driven piles.
We can build fences to ensure the safety of your solar power plant. Fence racks are specially designed for the flange of our ground screws. This simplifies installation and increases installation speed. So in a few days we can fence the entire station.
We specialize in the construction of prefabricated foundations on ground screws. Such a foundation is mounted in 1 day. Then on it you can immediately install a modular house for staff working at the station.
The screw foundation on the geo-screws is excellent for installing transformer substations such as СTS (complex transformer substation) and CDSC (Complete distribution substation of closed type).
The screw foundation is mounted in 1 day. A transformer substation can be installed immediately after the construction of the station
We provide lighting poles for our own solar power plants.
This type of support is well considered with a screw foundation. thanks to which they can be installed in a short time. One support is assembled in only about 1 hour.
It is possible to place fixtures for the solar panel to support autonomous lighting.
We provide lighting poles for our own solar power plants.
This type of support is well considered with a screw foundation. thanks to which they can be installed in a short time. One support is assembled in only about 1 hour.
It is possible to place fixtures for the solar panel to support autonomous lighting.
We chose PILLAR for the reason that they have a different design with ground screws under the tables. It is exclusive and almost never used in solar energy. PILLAR is a company of professionals who keep their word and do everything on time. Supply of materials and installation all at a professional level. We had a good impression, we look forward to further cooperation. To build not 5 MW, but so that our bill goes to tens.
Avenston Company: Industrial solar power plants.
Get advice on the design, production and installation of ground screws