BATHHOUSES

Design and installation of pile foundations
in Kyiv, Kharkov, Dnipro, Odessa, Nikolaev, Lvov, Zaporozhye and other cities of Ukraine.

GROUND SCREW FOUNDATION FOR BATHHOUSES

Ground screws are used in the construction of many structures, as the pile foundation is light and very practical. Due to this the screw foundation for the bathhouses is very popular. Ground screws for a bathhouses is the optimal solution for fast construction.

When setting the foundation for a bathhouse, you must implement necessary protection and waterproof sealing for the floor. Thanks to this water seal the foundation of the bathhouse won’t let moisture through. First of all, the bathhouse on the ground screws should be saved from the snow which is collected close to walls and causes dampness. When choosing a facing material pay attention to the material with high hydro and thermal insulation. So you get a bathhouse with a warm coating and high moisture resistance.

PILLAR compiles a project for the foundation of a bathhouse, prepares drawings of the foundation for these houses and calculates the foundation for bathhouses. Our services also include design the foundation for a bathhouse.

ADVANTAGES OF THE HOUSE FOUNDATION ON GROUND SCREWS

Installation of the foundation in 48 hours

One ground screw is installed in up to 15 minutes. You can start the construction of the building immediately after finishing with ground screws. Foundation of the house on the ground screws does not require shrinkage, because after screwing up the soil is compacted and as a result the soil is capable of supporting the weight of the house.

Solving relief problems

The possibility of mounting on sites with a complex landscape or on a slope, where the concrete foundation requires enormous labor and financial costs.

Easy installation

It is possible to install the foundation within several days. Involvement of complex construction equipment and excavation as concrete works are not required.

No water impact

Galvanized piles are practically not corroded, which allows its use in water-saturated soils and even in reservoirs.

No garbage at the construction site

Installation of the ground screw foundation is carried out using a mode, in which there remains a minimum of construction waste at the end of the work.

The possibility of installation in cold season

Compared to strip foundations, the pouring of it in winter time requires additional costs bound on thermal insulation of concrete. The installation of ground screws can be done in the normal operating mode.

STAGES OF INSTALLATION

Geological survey and construction project

In order to get optimal solution for the construction of the foundation the customer must provide a geological survey of the site and provide a construction project. Considering these data experts make conclusions about the properties of the soil and the loads of the future construction.

Foundation adaptation

Based on the data obtained our engineers prepare a calculation of the required number of screws and the distance between them, as well as the depth of it’s immersion. Depending on the collected loads for the foundation of the house, the optimal diameter and required length for ground screws are selected.

Installation

Screw foundations for low-rise buildings are installed in a short time. Depending on the complexity of the object, there are three options for screwing in: manual, electromechanical and hydraulic. After the ground screws have been installed at the required in design depth, the headstrap is strapped.

Our works

Cafe on the slope in the Dnieper

The foundation for a country house in Kirovsky

The foundation for the house on the slope

The foundation for the house on the slope

Contact us

Get advice on the design, production and installation of ground screws

To get a consultation, leave your contacts