Design and installation of pile foundations
in Kyiv, Kharkov, Dnipro, Odessa, Nikolaev,
Lvov, Zaporozhye and other cities of Ukraine.


Since the galvanized ground screws are unexposed to corrosion, they have found successful application in the foundation for hydraulic structures. Hydraulic works include piers, moorings, bridges and lighthouses.

Building a foundation on the water is quite problematic. However, the process of building the foundation has become much simpler and more comfortable with special advanced technologies.

Screw piles are ideal for this installation. Screw piles easy get the required depth in any water-saturated soil.

For the installation of ground screws is a flat ground in the coastal zone not necessary: they are easily mounted on any surface and at the same time have high stability and safety.

The optimal season for the installation of ground screws for hydraulic works is winter. In this season the piles are screwed into the ground through the holes in ice and there is no need to use pontoons which saves time and reduces costs.

The company PILLAR offers ground screws for the construction of pile foundations. We produce, design and install pile-screw foundations in Kyiv, Kharkiv, Dnipro, Odesa, Mykolaiv, Lviv, Zaporizhzhia and other cities of Ukraine.


Time saving

Ground screw foundation for hydraulic works can save up to 93% of time compared to the traditional foundation.

Convenience and simplicity

The minimum amount of additional building materials and equipment. Convenience of delivery to the construction site. Minimum risk of violation the technology.

All seasons

The foundation on ground screws can be installed regardless of the season and weather conditions. At the same time, in winter it is even easier to build this foundation, since the piles can be mounted from the ice without installing pontoons.

Not damaged by water

Galvanized piles are usually not corroded which enables its use in water-saturated soils and even in reservoirs.

No garbage at the construction site

Installation of the ground screw foundation is carried out using a mode, in which there remains a minimum of construction waste at the end of the work.

No noise and no vibration

Such feature of installation of ground screws allows to use them even in difficult situations when installation of the concrete foundation is impossible.


Geological survey and construction project

In order to get optimal solution for the construction of the foundation the customer must provide a geological survey of the site and provide a construction project. Considering these data experts make conclusions about the properties of the soil and the loads of the future construction.

Foundation adaptation

Based on the data obtained our engineers prepare a calculation of the required number of screws and the distance between them, as well as the depth of it’s immersion. Depending on the collected loads for the foundation of the house, the optimal diameter and required length for ground screws are selected.


Screw foundations for low-rise buildings are installed in a short time. Depending on the complexity of the object, there are three options for screwing in: manual, electromechanical and hydraulic. After the ground screws have been installed at the required in design depth, the headstrap is strapped.

Contact us

Get advice on the design, production and installation of ground screws

To get a consultation, leave your contacts